Last updated: August 10, 2026 · 6 min read
Airstylers and other heat styling tools use heating elements that can reach 110°C and beyond, and can cause burns if used incorrectly, just like any other heat tool for hair. The AirStraight adjusts its temperature up to 30 times per second through built-in sensors, which helps prevent the device from overheating, but that doesn't replace the need to handle hot parts with care.
In short
- Heat styling tools can cause burns if used carelessly, this applies to every brand, not just airstylers.
- The AirStraight uses sensors that adjust the temperature up to 30 times per second to help prevent overheating.
- Never touch the curling barrel or plates directly during or right after use, let the device cool down first.
- For children or inexperienced users, always use the lowest heat setting and stay supervised.
- Never use the device on the wrong mains voltage, that can cause the electronics themselves to overheat.
Below, you'll find concrete ways to lower the risk of burns, and which features help with that.
Where exactly does the burn risk with an airstyler come from?
The risk mainly comes from direct skin contact with the heated curling barrel or plates, and from careless use near the scalp, ears, or neck. The Airstyler Pro Ceramiq gives you three heat settings to choose from (35°C, 70°C, and 110°C), and the highest setting in particular calls for care, just as it would with any straightener, curling iron, or airstyler from any brand.
This isn't a risk unique to Ace & Taylor, it applies to every device that works with heat. The best a brand can do is build in features that reduce the risk, such as temperature sensors and a cool setting, and provide clear usage instructions on top of that.
Which features help prevent overheating?
The AirStraight uses sensors that measure and adjust the temperature up to 30 times per second, so the device doesn't run uncontrollably hotter than the setting you've chosen. It also has a Coolshot function, which locks in your style with a cooler burst of air once you're done styling.
The Föhn PrecisionAir also has a Coolshot button, and both the hairdryer and the airstyler offer multiple heat settings, so you can choose a lower temperature yourself if that suits your hair or your experience with the device better.
Practical tips for styling safely
Never touch the curling barrel, plates, or nozzle directly while the device is in use, and let it cool down for at least a few minutes after use before you put it away or handle it. When curling or straightening, always keep enough distance from your scalp, ears, and neck, especially on the highest heat setting.
For children, teens who are just learning to style their hair, or anyone using a heat tool for the first time, the lowest heat setting is the safest starting point, alongside supervision from an experienced user. Also always use the device on the correct mains voltage: using it abroad without the right voltage converter can actually cause the electronics to overheat.
Frequently asked questions
Can an airstyler cause burns?
Yes, that can happen with direct contact with the heated curling barrel, especially on the highest heat setting. This applies to any heat styling device, not just airstylers.
What exactly does the AirStraight's sensor technology do?
The sensors measure and adjust the temperature up to 30 times per second, so the plates don't run uncontrollably hotter than the Wet Mode (120-160°C) or Dry Mode (80-140°C) setting you've chosen.
Which heat setting is safest for children or beginners?
The lowest setting, which is 35°C on the Airstyler Pro Ceramiq, combined with supervision from an experienced user until someone is comfortable with the device.
What does a Coolshot function do?
A Coolshot blows cooler air instead of warm air, which locks in your hairstyle after styling. It isn't a safety feature against burns, but it does help keep your hair's final temperature manageable.
Sensor technology that thinks along with your temperature control.
The AirStraight adjusts its temperature up to 30 times per second through built-in sensors and has a Coolshot function to lock in your style. Combine that with careful use for the safest styling experience.
2-year warranty
30-day home trial
Free shipping
Trustpilot 4.7/5
Shop the AirStraight
A&T
Written by the Ace & Taylor Team, based on the safety questions we hear most from customers using a heat styling tool for the first time.
